DIGITAL TORQUE ADAPTER 3-30 Nm READING 0,01 Nm...
Ref : CLET5-ADS03012
Availability: Out of stock
Measuring range : 3-30 Nm, Reading : 0,01 Nm, Digital : Yes, Accuracy : 2% clockwise / 2,5% counterclockwise, Size : 1/2"
There are 135 products.
Active filters
CLASS 1 INTEGRATIVE SOUND LEVER METER KIT BLET
Ref : DOSD3-11NKP-00
Availability: Out of stock
Display : Digital ; Tolerance class : 1 ; Anlyzer : No ; Kit : Yes ; Measuring range : 30dbA - 143 dB Peak ; Memory : 8Mb
Ring terminal fixture
Ref : TAF56-TER1
Availability: Out of stock
Multiple pin sizes are provided, from 1/8" to 3/8" [3.2 to 9.5 mm] dia.
DENSIMETER RESOLUTION 0,001 G/CM3 FEATURE SOLID...
Ref : DENM1-MILLSEL
Availability: Out of stock
Capacity 0.01-300 g Resolution density 0.001 g / cm3 Nature Solid and liquid sample Repeatability +/- 0.01 g / cm3 maximum size sample of 120 x 70 x 30 mm
Bench centres without dial gauge BLET
Ref : CONXX-E6NS0-00
Availability: Out of stock
Bench of centres; Height of centres : 200 mm ; Distance between centres: 650 mm ; V-groove support :No
DIGITAL TORQUE ADAPTER 13,5-135 Nm READING 0,1...
Ref : CLET5-ADS13512
Availability: Out of stock
Measuring range : 13,5-135 Nm, Reading : 0,1 Nm, Digital : Yes, Accuracy : 2% clockwise / 2,5% counterclockwise, Size : 1/2"
CLASS 2 INTEGRATIVE SOUND LEVER METER KIT BLET
Ref : DOSD3-21NKP-00
Availability: Out of stock
Display : Digital ; Tolerance class : 2 ; Anlyzer : No ; Kit : Yes ; Measuring range : 30dbA - 143 dB Peak ; Memory : 8Mb
MANUAL WIRE CRIMP PULL TESTER
Ref : TAF56-MANU
Availability: Out of stock
Lever operation, USB, RS-232, Mitutoyo, analog, set point outputs, 1,000-point data memory and statistics, Auto output / data storage / zero upon sample break
DENSIMETER RESOLUTION 0,01 G/CM3 FEATURE SOLID
Ref : DENM1-CENTSOL
Availability: Out of stock
Capacity: 0.01-300 g Resolution density: 0.01 g / cm3 Sample Type: Solid only Repeatability +/- 0.01 g / cm3 Weight: 1.6kg
Bench centres without dial gauge BLET
Ref : CON10-B3OP0-00
Availability: Out of stock
Bench of centres; Height of centres : 75 mm ; Distance between centres: 350 mm; V-groove support : Yes
DIGITAL TORQUE ADAPTER 20-200 Nm READING 0,1 Nm...
Ref : CLET5-ADS20012
Availability: Out of stock
Measuring range : 20-200 Nm, Reading : 0,1 Nm, Digital : Yes, Accuracy : 2% clockwise / 2,5% counterclockwise, Size : 1/2"
MOTORISED WIRE CRIMP PULL TESTER
Ref : TAF56-AUTO
Availability: Out of stock
Configurable test speed, Auto-start and reverse at break, 2,000-point data memory with time stamp and statistics, Auto output / data storage / zero / reverse upon sample break